Yale Cordage is back at it again! They have recently re-dedicated themselves to the marine market, developing some new and interesting lines. We recently got our hands on some of this new experimental product which we used at the BVI Spring Regatta on the IC 24 we were sailing. The product was built with a spectra/dynema core with a new Maxi-Jacket HP coating with their new “Wave” cover. The real development here is the “Wave” cover with a strong core. The cover is built to have a very soft hand that matches well with the core which makes a line that performs well in every condition.

We found the line to be very stiff and kinky when we first received it and were a bit sceptical about how it would perform. However, we soaked the line and roughed it up a bit by working four foot sections of the line through a ratchet block. After this initial break-in the line was perfect – soft and flowing but strong enough to handle high loads.

We used the line for the main, spinnaker and jib sheets. The conditions over three days were 35 to 20 knots and big waves. With only a four to one on the main sheet the line was under constant stress and work. The mainsheet trimmer was very pleased with the line as well as the driver. The line doesn’t absorb too much water and stays light.

We will continue to use this line which should hit stores this fall. We will keep you posted on an acutal release date and how it will wear over the summer. Stay tuned!